Net-Lynx is a portable DMX to Ethernet or Ethernet to DMX converter. It is available in two versions: Net-Lynx I/P is used to convert two universes of DMX512 to Ethernet, while Net-Lynx O/P is used to convert Ethernet to two DMX512 outputs. It uses the Art-Net Ethernet protocol.

Net-Lynx can be configured using the three rotary dials on the front panel or remotely via the network port. The Ethernet connector is a latching Neutrik Ethercon connector, which can also accept standard RJ-45 connectors.

Net-Lynx is compatible with all versions of DMX512, and also supports the RDM (Remote Device Management) protocol, allowing bi-directional communication with compatible moving lights and dimmers.

Features:

• Two DMX512 inputs
• 10BaseT Ethernet Port
• DMX routing by Ethernet
• Connect up to 256 DMX Universes to one network
• Compatible with DMX512-A & RDM Draft V1.0
• Power indicator
• Data activity indicators
• Art-Net Compatible
• Truss Mount Adapter available

Specifications:

• Listing: CE FCC
• IP Rating: Indoor use
• Power: 2W
• Input Voltage: 9-48VDC
• Height: 115mm
• Width: 195mm
• Depth: 55mm
• Weight: 0.40Kgs
• DMX Input Connections: XLR5
• Network Connections: XLR-RJ45
• Power Connection: XLR4
• Isolation Ethernet port: Total Isolation
• Isolation Power input: Total Isolation
• Isolation DMX A/B: Common ground

Downloads:
Net-Lynx Brochure (pdf format)
Net-Lynx Input User Manual (pdf format)
Net-Lynx Output User Manual (pdf format)
Art-Net Protocol Specification (pdf format)