The 8-way DMX Splitter is a fully compliant DMX-512 (1990) DMX Splitter designed to amplify, regenerate and isolate the DMX signal for reliable operation over long distances or in noisy environments.  It accepts one DMX signal and splits it into eight optically isolated buffered outputs.

• Fully compliant to DMX-512 (1990) specification
• 5-pin XLR input and loop through
• DMX In and DMX Through can be front or rear mounted by user
• Input isolated from outputs to 500VAC, 1000VDC
• Outputs are isolated from each other to 500VAC, 1000VDC
• 8 outputs with 5 pin XLR sockets fitted as standard
• Universal mount XLRs allows easy change to 3 pin XLRs if required
• 3 pin XLR option or upgrade available
• 8 front panel LEDs indicate DMX status at each output

• Power: Mains supply, 90-250 VAC 50/60Hz
• Power input on rear panel via IEC connector
• Front panel LED power indication
• 1U (44.5mm) high 19 inch rack mount construction
• Removable rack mount wings can be mounted front or rear
• Black powder coat finish
• All DMX XLR connectors quality Neutrik brand
• Dimensions: Standard 19” rack, Width: 482.5mm, Height: 1U (44.5mm), Depth: 330mm
• Weight: 8.2 kgs

Downloads:
8 Way Splitter Brochure (pdf format)

The 4-way DMX Splitter is a fully compliant DMX-512 (1990) DMX Splitter designed to amplify, regenerate and isolate the DMX signal for reliable operation over long distances or in noisy environments.  It accepts one DMX signal and splits it into four optically isolated buffered outputs.  It is designed to be highly portable and is suitable for truss mounting.

Features:

• Fully compliant to DMX-512 (1990) specification
• 5-pin XLR input and loop through
• Optically isolated, buffered DMX outputs
• 4 outputs with 5 pin XLR sockets fitted as standard
• 4 front panel LEDs indicate DMX status at each output

Specifications:

• Power: 100 to 110V or 220 to 240V AC adaptor
• Front panel LED power indication
• Input signal: DMX-512 (1990) via 5-pin XLR socket
• Construction: Extruded anodised aluminium chassis, with powder coated steel plate front and rear panel and durable epoxy ink screening
• Dimensions: Standard 19” rack, Width: 200mm, Height: 40mm, Depth: 150mm
• Weight: 1.5 kgs

Downloads:
4 Way Splitter brochure (pdf format)

DMX-512 is today’s standard digital communications protocol for the lighting industry.  Theatrelight’s range of optically isolated DMX-512 receivers allows analogue devices to work with any modern DMX-512 output consoles, thus allowing you to upgrade your control desk while continuing to use your old dimmers.

Features:

• DMX-512 (1990)Input, optically isolated
• Can drive any make of dimmer requiring plus or minus 10, 12 or 15 Volts
• Selectable with or without diode offset
• Selectable start address from 1 to 512
• Several units can be linked together for larger installations
• 64 channels per unit
• External power supply

• Input Power: 100 to 110 volt or 220 to 240 volt AC adaptor
• Input signal: DMX-512 USITT (1990) standard via 5 pin XLR socket
• Output Signal: Switchable + or – 10, 12 or 15 volt via DB25 sockets
• Construction: Epoxy powder coated steel case, extruded aluminium chassis, with screened durable baked epoxy ink
• Dimensions: Width: 482mm, Height: 40mm, Depth: 110mm
• Weight: 1.7 kgs

Downloads:
DMX Receiver Instructions (pdf format)